簡 介
美孚派路830乃采用精挑的高份子碳?xì)錈N與酯類基礎液小心平衡調配而成的全合成潤滑油， 專用於在干燥爐之高溫輸送鏈條上。其出眾之氧化穩定性已在廣泛實際應用條件下得到證實， 較其他礦物油或固體鏈條潤滑劑更能減少鏈條上積炭， 并延長鏈條清理周期。
優 點
·為鏈條及小齒輪提供高度磨損保護
·降低潤滑油耗量
·降低用電量
·高溫性能優異
·提高操作安全
用 途
美孚派路830可應用於干燥爐及拉幅機架上的高溫輸送鏈條。此類機器通常用于制造玻璃纖維、石棉度及碎料板的連續生產程序可應用于溫度不高于230°C之鏈條。 潤滑方法可用機噴法或手掃法。改用本產品時,須先將鏈條徹底清理， 以免舊有積炭影響潤滑效果。噴射器噴咀亦須清理并加以調較,使?jié)櫥湍車娚潇舵湕l鉚釘上。噴射數量亦要適度控制以防止產生積垢及減少耗油量。
特 性
·高溫下只產生微量積炭
·容易流迸鏈條內， 磨擦力因而減少
·蒸發,損耗低
·無惡臭
Product Descr1ption
Mobil Pyrloube 830 is a fully synthetic lubricant based on a carefully balanced blend of high molecular weight hydr℃arbons and an ester based fluid. It has been developed for use on hot conveyor chain applications in drying ovens. Its outstanding oxidation stability has been demonstrated in extensive field service. Mobil Pyrolube 830 provides less coke formation and extended chain cleaning intervals compared to mineral oil and solid type chain lubricants.
Benefits
· High wear protection of chain and pinion
· Reduced lubricant consumption
· Reduced energy consumption
· Outstanding high temperature performance
· Improved operation safety
Application
Mobil Pyrolube 830 is suitable for the lubrication of hot conveyor chains in drying ovens and tenter frames. This equipment is commonly found in the manufacturing of glass fiber and r℃k wool mats and the continuous production of particleboards. The lubricant can be fed automatically to the chain by nozzle pipes or it can be applied by hand using a brush. Before changing to Mobil Pyrolube 830 the chain should be cleaned since deposits from the product previously in use could prevent proper lubrication. Application nozzles should also be free from deposits and properly positioned to deliver the product to the chain rivets. Lubricant feed rates must be monitored to prevent deposit formation and reduce consumption.
Properties
· Negligible deposit formation at high temperature
· Free flow and entry of the lubricant to the chain means less friction
· Low evaporation loss
· No unpleasant odor | Characteristics 特 性 | 以 下 所 列 數 據 除 特 別 注 明 外， 均 為 典 型 值
Typical values unless otherwise stated | Mobil Pyrolube 830
美 孚 派 路 830 | Density @ 15 ℃，kg/L
密 度 @ 15 ℃ ，千克 / 升 | 0.93 | Pour Point, ℃
傾點, ℃ | -46 | Flash Point, ℃
閃點 , ℃ | 270 | Viscosity 粘度
cSt @ 40 ℃
@40 ℃ 厘斯
cSt @ -30 ℃
@-30 ℃ 厘斯 | 180
20.4 | Viscosity index
粘 度 指 數 | 130 | Color, ASTM
顏 色， ASTM | 3.0 |
|
